5560A/5550A/5540A Firmware (update)What's NewThe latest firmware updates for the Fluke 5560A/5550A/5540A bring some sought-after features that customers have requesting. The full list of key changes can be found below, but here are a few new additions to highlight:Control up to three 52120A Transconductance Amplifiers via rear panel connectorUsing the rear panel connector on your Fluke 5560A/5550A/5540A, you can now remotely control up to three 52120A Transconductance Amplifiers through your 5560A/5550A/5540A...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Fluke Calibration 现已迁至 fluke.com 网站！我们进行了多项重要更新，以提升客户体验和服务质量。主要更改包括：1. MET/SUPPORT Gold 注册：为充分利用您的 MET/SUPPORT Gold 帐户，您需要在 fluke.com 上注册帐户。此过程需要用到您的 MET/SUPPORT Gold 号码和 PIN 码，购买支持服务后，将通过电子邮件发送给您。注册后即可获得优先技术支持、下载程序和软件更新等。有关详细信息，请参阅知识库文章：如何注册...

The Fluke Calibration 5790B AC Measurement Standard is a multi-purpose AC measurement and transfer standard designed for the most demanding calibration applications. It combines the accuracy you would expect from a thermal transfer standard with the ease of use of a digital multimeter.Absolute AC voltage measurement uncertainties are as low as 24 ppm for one year in a 23 °C ± 5 °C environment. The 5790B in combination with the Fluke Calibration A40B Current Shunts allow you to make absolute or...

Hi, this is Jeff Grossman, Sales Engineer for Fluke Calibration’s pressure and mass flow calibration solutions, here to provide you with a demonstration of one of our three modular pressure controllers. I happen to have here the 8270A which has a maximum pressure of 6000 psi complemented by the 6270A maximum pressure of 3000 psi and the 8370A with maximum pressure of 15,000 psi. The nice thing is they share a lot of commonality which makes them easy to switch between and easy to use.Very small...

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...

PPC2+ v2.02f Embedded Software (.bin)TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+Instructions:Do Not use with PPC2-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

PPC4 Cockpit Free Utility - 32bit Installer (.exe)Additional Downloads:PPC4 Cockpit Free Utility - 64bit Installer (.exe)TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4Reference the PPC4 Operation and Maintenance manual for details on the operation of the PPC4 Cockpit.Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe PPC4 Cockpit is a free...

PG7000 Ver 1.05f Embedded Software (.bin)TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:Download the file. Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating...

PG7000/PG9000 Ver 3.1.5.255 Embedded Software (.bin)TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.Instructions:The PG7000/PG9000 firmware versions 3.00 and newer are intended to work with all PG9000 models and PG7000 models with serial numbers 733 or newer. Do not attempt to upgrade an older PG7000 model with this software. This upgrade does not...

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

PPCK+ v1.00m Embedded Software (.bin)TITLEVERUSE WITHPPCK+™1.00m2005.01.05PPCK+Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

1594A/1595A Firmware update version 1.22 (.ud)Title: 1594A & 1595AVer: 1.22/1.02Use with: All 1594A & 1595ADate Modified: 2/20/2014Description of the change:  It was recently determined that when a customer selects the “Restore Factory Default” button in the Config Menu, the resistor calibration values are reset to the default values without requiring a password or notification to the customer that the values are being reset. Engineering has investigated this issue and the instrument firmware...

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Crystal Reports 2013 (.iso)For the product key to use with your Crystal Reports Editor installation for MET/TEAM, contact softwaresupport@flukecal.com. Include the version you are using in your email.This is the Crystal Reports to be used with MET/TEAM software (not MET/BASE).Special instructionsClick on the link to download the software.MDS check sum:395a1705f0c23770ea5514580313bc4

Crystal Reports 2020 (.exe)For the product key to use with your Crystal Reports Editor installation for MET/TEAM, contact softwaresupport@flukecal.com. Include a screen capture of your MET/TEAM Help>About screen. Instructions are here: https://my.fluke.com/en-us/article/KA-03961.This is the Crystal Reports to be used with MET/TEAM software (not MET/BASE) for editing Reports. Service Pack 2 Patch 5If you are currently using Crystal Reports Editor 2013, you should:Uninstall Crystal Reports 2013Reboot...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator »  LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator » 7250 Series Pressure Controller/Calibrator » 7615 Hydraulic Pressure Controller/Calibrator » 7750i Air Data Test Set » molbox1+ Mass Flow Terminal » PPC4 Pressure Controller/Calibrator » PPCH Hydraulic Pressure Controller/Calibrator » RPM4 Reference Pressure...

LabVIEW driver for PPC3 and PPCH (.exe)Additional Downloads:LabVIEW driver for PPC2+ and PPCK+ (.exe)LabVIEW driver for PPC2 and PPCK (.exe)LabVIEW driver for RPM3 (.exe)LabVIEW driver for RPM4 (.exe)LabVIEW driver for molbox (.exe)LabVIEW driver for molbox RFM (.exe)LabView® drivers for Pressure ProductsUSE WITHVERDOWNLOADPPC3™DescriptionLabView is a registered trademark of National Instruments Corp.Instructions:As noted by the table, some of the LabView Drivers support more than one product....

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

9142 US/EU ver 1.35 firmware update (.zip)Additional Downloads:9142 Asia ver 1.35 firmware update (.zip)9143 US/EU ver 1.35 firmware update (.zip)9143 Asia ver 1.35 firmware update (.zip)9144 US/EU ver 1.35 firmware update (.zip)9144 Asia ver 1.35 firmware update (.zip)Download appropriate file from above. See "Instructions" below to determine correct file. Title914x Ver 1.35 UpdateVer1.35/1.35Use withAll 9142/9143/9144 Field Metrology Wellswith internal reference readout (–P option)Date Modified18-May-2012Description...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

CI Editor PC Based Free Utility (.exe)Additional Downloads:Mensor 400 CI Definition (.ci)Mensor 600 CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)Ruska 6000 CI Definition (.ci)All Ruska models that support the SCPI command syntax (.ci)TITLEVERUSE WITHDOCUMENTSCI Editor™1.002009.03.06PPC4See CI Editor [Help] menu to access the help system.Instructions:The CI Editor is used to maintain CI Definitions for the PPC4.Download and run the file. The...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

GFSTools PC Based Software (.exe)TITLEVERUSE WITHGFSTools™1.012010.12.03GFS 2102DescriptionGFS Tools is a PC based application used to operate the GFS 2102 Gravimetric Flow Standard.  SummaryGFS Tools is the PC based interface to the GFS 2102. All necessary features are included to log data for up to 2 DUTs in comparison to the GFS from 1 sccm of N2 to 10 slm of N2. Options are provided to set manual or automatic flows using an MFC and to define a test sequence of flow points to fully automate...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

4181 Firmware Update (.zip)Title:4181 Firmware UpdateVer:1.14/1.15Use with:4181Date modified:04/22/2021Description of the change:Firmware updated to support a Heater reconfiguration due to excessive heater damage. This fix reduces the maximum duty cycle of the Gradient heaters during Ramp as well as at Steady state conditions. This is used in conjunction with hardware changes to Heater and insulation configuration.Recalibration of unit is not required with this update when using the initial Block...

2271A Embedded Software, Update by USB (zip)TITLEUSE WITH2271A2271AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 2271ABegin by clicking on the Get software button. Then download the zip file by clicking the 2271A v10x USB.zip...

1620A Firmware Update v. 1.15 (.exe)Title:1620A Firmware UpdateVer:1.15Use with:All 1620ADate Modified:7/23/2013Description of the change: NoneDownload Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial port on the computer. Note: If your computer only has USB serial interface, an adapter from USB...

4180 Firmware Update v. 1.14 (.zip)Title:                  4180 Ver 1.14 UpdateVer:                    1.14/1.10Use with:           4180Date Modified:  03/07/2013Description of the change:  Firmware updated to fix a bug found in the SetPt menu screen when operating the F4 disable key in release Vers 1.13/1.10.Changed the unit operation to use the Emissivity from the active program when operating a program. Recalibration of unit is not required with...

1529 Firmware Update v. 2.04/1.00 (.zip)Title:                  1529 Main FirmwareVer:                    2.04/1.00Use with:           1529Date Modified:  9/5/2012Description of the change: NoneDownload Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

Minimum recommended system requirementsMET/TEAM server*  SQL DatabasesOperating SystemsSQL Server 2012SQL Server 2014SQL Server 2016SQL Server 2017SQL Server 2019SQL Server 2022Windows 10√√√√√√Windows 11Not supportedNot supportedNot supported√√√Windows Server 2016Not supported√√√√√Windows Server 2019Not supported√√√√√Windows Server 2022Not supportedNot supportedNot supported√√√*Home, Home Basic, Home Premium, and Core editions of Windows are not supported.Database...

LEMCal Laboratory Environment Monitor software (.zip)Requirements:Microsoft® Windows® 95 or higher (Windows 7 32-bit and 64-bit are supported)1.6 MB of available hard disk space,32 MB RAM,RS-232 or RS-485 portInterface includes extensive help and system manual includes syntax commands.Unzip the downloaded file and click on LemCAL.exe to install.Version 1R08File size: 4 MB

8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

9170 Firmware (.zip)Additional Downloads:9171 Firmware (.zip)9172 Firmware (.zip)9173 Firmware (.zip)Title:917X FirmwareVersions:9170: Ver. 1.209171: Ver. 1.209172: Ver. 1.209173: Ver. 1.20Use with:All 9170, 9171, 9172 and 9173Date Modified:1/1/2012Download Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial...

PPC2-AF v1.01e Embedded Software (222.5 KB)TITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFTITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFInstructions:Do Not use with PPC2+!This software revision affects only the PPC2-AF on-board routines for calibration of the PPC2-AF's RPTs. It has no effect on regular operation. This new release is recommended for all PPC2-AF units, in particular those on which difficulty with calibration of the Lo Reference Pressure Transducer has been encountered. The FCAL...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your Fluke 700HPPK/700HPM. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have any questions, please do not hesitate to contact us. https://www.fluke.com/en-us/support/technical-support

WinFlash Free Utility (.exe)Additional Downloads: WinFlash64™ 2.20 (64bit OS) (.exe)PC BasedFree Utilities - WinFlash™TITLEVERUSE WITHWinFlash™2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTWinFlash64™(64bit OS)2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTDescriptionFirmware upgrade utility. This program...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

RPTLoad Free Utility (.exe)TITLEVERUSE WITHRPTLoad™ Free Utility1.04cAll products with quartz crystal based RPTs or Q-RPTsInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe RPTLoad program is designed to transfer RPT coefficients to and from DHI products. In addition to updating coefficients, RPTLoad can also be used to configure RPM1 reference pressure monitors.Updates Include:Ver 1.04c (03 OCT 20)FIX: Corrected support of BG TYPE...

FPGTools PC Based Software (.exe)File size is 171.33 mb.TITLEVERUSE WITHFPGTools™3.03f2010.06.03FPG8601DescriptionFPGTools is PC based software.SummaryThis application is the PC interface to the FPG8601 and the VLPC. Features are included to log data from the FPG and up to 5 DUTs, run test sequences, and perform all necessary routine procedures required by the FPG. This application cannot be used without an FPG8601 and a functioning RS232 port on the host computer.Instructions:Download and run...

Release: MET/CONNECT version 1.0.0 (with MET/CAL version 10.0.0) (.zip)Documents:MET/CONNECT 1.0.0 Installation Guide (.pdf)MET/CONNECT 1.0.0 readme (.pdf)MET/CAL 10.0.0 readme (.pdf)Review our Quick Installation Guide on the Fluke Calibration Support Knowledge Base.New MET/CONNECT Customers or Current MET/TEAM or METBASE customersThis download is the 60-day trial version. Use the MET/CONNECT Server Installer to perform a new installation. This installer is included in the download link above and...

By: Jacek Karpol-Nawrocki and Christian Beham, Professional Service Managers at Fluke ReliabilityFluke Mobile is a software application optimized for mobile workers using the IBM Maximo EAM platform. By integrating Fluke Mobile with your Maximo system, you enable maintenance teams to respond to corrective maintenance requests and work orders in a single workflow on a tablet or smartphone.The seamless integration of unplanned and planned maintenance requests on a mobile device helps organizations...

In the last decade or so the trend in factory automation has been to replace the traditional control scheme, where each device has its own control wiring, with bus systems that link multiple devices through the same cable. One of the most popular and widely used bus systems is Foundation Fieldbus, which includes two different protocols–H1 and HSE (High-speed Ethernet) protocol. Each of those protocols meets different needs within the factory automation environment and uses different physical media...

Using a three-phase power monitor and cloud-based condition monitoring software resulted in savings of more than $40K.Many people rely heavily on eyeglasses to see. According to Vision Council of America, 64% of adults wear eyeglasses.OptoTech is a leader in optical machinery equipment. It has a broad range of machinery and process technology for both precision and ophthalmic optics and offers complete production lines including generating, edging/centering, and polishing and measuring.The company...

World Metrology Day 2012 MessageWorld Metrology Day commemorates the signing of the Meter Convention on May 20, 1875. Those who are dedicated to metrology, the science of measurement, recognize this day each year as their time to celebrate the importance of measurements. The theme for World Metrology Day 2012 is “Metrology for Safety.” Fluke Corporation, one of the world’s leading metrology companies, is dedicated to facilitating workers’ safety through test and measurement tools as well...

Harnessed PV arrays are solar installations where multiple strings of photovoltaic (PV) modules are connected in parallel upstream of the inverter, reducing the number of combiner boxes and associated wiring. This configuration offers cost savings, but it also poses challenges for performance testing. In this guide, you’ll learn how to set up, calibrate, and analyze I-V curves using advanced tools like the Fluke PVA-1500, and discover best practices for optimizing performance in harnessed PV arrays.Why...

World Metrology Day 2013A message from Fluke Chief Corporate Metrologist Jeff GustScientists and engineers dedicated to metrology (the science of measurements) celebrate May 20 as World Metrology Day. On May 20 1875, representatives from seventeen nations signed an international treaty to coordinate weights and measures activities internationally and to support the development of the metric system. The theme for World Metrology Day 2013 is “Measurements in daily life.” In keeping with this year’s...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Update: MET/TEAM version 2.3.0 (with MET/CAL version 9.2.0) (.iso)Documents:MET/CAL 9.2.0 Readme (.pdf)MET/TEAM 2.3.0 Readme (.pdf)MET/TEAM version 2.3.0 and MET/CAL version 9.2.0Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 2.3.0 and MET/CAL version 9.2.0 release is a security and stability update to previous MET/TEAM and MET/CAL software. This update includes security improvements, bug fixes, and minor updates.Upgrading from any previous version of MET/TEAM...

Acoustic imaging technology has emerged as a transformative tool in various industries, offering a novel approach to sound analysis. It provides precise visual representations of sound sources, contributing significantly to industrial maintenance, enhancing reliability, and ensuring safety. In this article, we will explore the fundamentals of acoustic imaging, its industrial applications, and the benefits it offers.What is Acoustic Imaging?Acoustic imaging technology excels at converting sound waves...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

Solar power is growing in the US, with solar PV making up 54% of new electricity capacity in Q1 2023. As the global urgency for clean power generation recognizes, technological breakthroughs unlock unprecedented potential for a sustainable future. This article discusses five new technologies that enhance solar energy and make it more accessible and eco-friendlier. These technologies include agrivoltaics, floating solar arrays, high-powered microinverters, automated robotic installation, and next-gen...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

HART (Highway Addressable Remote Transducer) Protocol is an open standard used globally to send and receive digital information using analog wiring between smart devices and control systems. With over 30 million devices installed, it is the most popular protocol used in the field. HART was first available in the late 1980s and quickly gained in popularity mainly due to its ability to continue to support the older 4-20 mA analog protocol while adding the significant benefits of digital smart instrumentation.The...

The triple point of water (TPW) is the only thermometric fixed point used in definitions of both the thermodynamic temperature and the international temperature scale. It is undoubtedly the most important fixed point in thermometry. Some results from the international comparison of TPW cells undertaken a few years ago found differences among TPW cells as large as 0.1 mK or more. This is why we started working to improve the quality of our TPW cells about four years ago.As we know, impurities in the...

PPC4E完美融合了PPC4控制器/校准器系列产品的最佳特性、测量技术和获得专利的PPC压力控制技术，提供非常广泛的压力量程覆盖范围，可用于最常见的校准工作。

5522A可输出直流电压和电流、多种波形或带谐波的交流电压和电流、两路同步电压或电流输出，直流功率和交流功率，还有电阻、电容、模拟热电偶和模拟热电阻输出。

新的铂铜热电阻检定规程JJG229-2010 和水银温度计检定规程JJG161-2010 规定，在检定A A 级和A 级工业铂电阻和标准水银温度计时必须实测标准铂电阻的水三相点值，这就要求实验室必须拥有一套使用方便、经久耐用的水三相点系统。如果没有水三相点系统，就不能够建标完成对A级和AA级热电阻的检定。水三相点系统包含性能优良的水三相点以及支持二等标准铂电阻测量准确度的测温仪

利用 MS-DBFIX 服务，可以修复大多数损坏的数据库，并向您返回可立即使用的数据。

福禄克能帮助您将校准数据从旧的数据库迁移到新的 MET/CAL Plus 数据库中。

MET/SUPPORT 黄金支持计划是一项年度会员计划，提供优先的支持和服务，以帮助您尽可能提高工作效率。

MET/CAL软件密切结合校准过程中的仪器流程定制，满足从简单到复杂的各种各样的测试和测量仪器校准需求。其框架基于传统的校准模式——将仪器与已知不确定度的标准进行比较。

系统管理员在MET/CAL、5500/CAL 或 MET/TRACK® 系统中的活动仅限于与系统相关的活动，其中包括添加、更改或删除用户，设置访问级别，等等。

9500B是一款专业的高精度多通道示波器校准器，配合不同有源探头校准各类示波器。稳幅正弦波带宽最高至6.4 GHz ，快沿脉冲最高25ps。